Appearance:Please check the photo carefully! Optical system: CLEAN GLASS CLEAN Visibility. There are no dirty or scratches that could adversely affect observation.Since it is a used lens, it is not inspected by enlarging it with a magnifying glass. It has been confirmed with the naked eye under strong light. I confirmed it by shining a strong light with a light, There is no dust. I confirmed it by shining a strong light with a light, There is no balsam separation. I confirmed it by shining a strong light with a light, There is no haze on inside of the lens.
I confirmed it by shining a strong light with a light, It has no thread fungus on inside of the lens. I confirmed it by shining a strong light with a light, It has a little scratch.
It's prettier with the naked eye. If you take a picture with a smartphone, the dirt will inevitably stand out. Please judge the condition of the lens from the observed photograph.
If you can't judge, please think it's better. Please check the photo carefully! Shown on the photo is everything. Anything not shown in the picture is not included.Can be bundled with other products. Items below for details on bundling. Listed lens types / long-neck objective lenses. Please make sure that the microscope is for the LB (Long Barrel) series (1X to 100X oil) with a focal length of 45 mm and a mechanical barrel length of 160 mm before purchasing. Incompatible Microscope / Please check. If you have a microscope with a short-neck objective lens with a focal length of 36.65 mm or an objective lens that is compatible with infinity correction, you can attach it to the nosepiece, but you cannot observe it. Tools used to test objective lenses.
Phase Contrast Capacitor 1.25 Phase Contrast Condenser. MTV-3, Relay Lens NFK 2.5X LD 125. USB microscope camera 18 million pixels.Olympus LBD-2N Blue Filter, Nikon GIF Green Filter. About the diatom preparation used in the objective lens test. It is mainly tested with a diatom preparation developed for performance testing of dry objective lenses and for testing microscope illumination. This diatom preparation is tested with an extremely reliable diatom test plate that is also used by major optical equipment manufacturers.
The 12-13 putamen is mounted around diatoms, which are easy to use for lens testing. The main species are Nitzschia, Pleurosigma, Stauroneis, Pinnularia, etc.It supports a wide range from low magnification objective lenses to oil immersion areas. It also supports the limit performance check of high magnification objective lenses with a numerical aperture of 1.4. Since this product is mounted with an encapsulant with a slightly low refractive index, it has a low contrast and has been tested with a preparation that is ideal for training in speculum technology.
Diatoms are mounted with the utmost care using a blue plate slide glass (0.9 mm thick) with few surface defects and a cover glass of 0.170 ± 0.005 mm. About the quality of the diatom slide used. When examining traditional preparations from an optical point of view, the thickness of the cover glass, the thickness of the mounting medium, the focus shift due to the difference in the height of the diatom, and the foreign matter and devitrification of the mounting medium make it unusable as a reference for the differential interference method.It is also true that there were many problems such as It goes without saying that it is desirable to supply inspection plates of uniform optical quality, as inspection plates cannot be inspected correctly if they have defects. After examining these problems, we developed a method of arranging diatoms directly on the surface of the cover glass and encapsulating them directly, making it possible to manufacture a completely new quality test plate. We test the quality of the objective lens by observing it under the above environment. I observed it with the lens for sale and left it in the image. When I save the first observed image, I save it as JPEG.
So when you look at it in person, it looks sharper than the image you see uploaded in the product description. If the image is actually bad when the product arrives, I would like to ask you to confirm. Try rotating the objective lens from the nosepiece. Try moving the slide slightly. What about dirt not only on the front side of the slide but also on the back side?
Is your microscope's viewfinder dirty with dust? Are the capacitors too low? If the position of the condenser is low, various dirt can be seen. Position the condenser as high as possible.If it is raised too high, it will not be in focus and the contrast will be lowered or unclear. The smudges in the image may be on the field lens or on the internal mirrors below the field lens. Do you regularly maintain your microscope? More to the point, have you seen the instruction manual for the microscope you have?
There are many other things I would like you to check. Is it because there is not enough light? If the amount of light is small, dirt is easily reflected.Is the aperture setting wrong? Please check these and send me a message regarding the condition of the lens. Even though I'm strictly referring to. This is because the way an image is captured is completely different depending on the difference in observation techniques, knowledge, and experience. Depending on the equipment used for observation, the image will look different.
In fact, I was able to observe and shoot neatly to some extent as shown in the photos I posted. Buyers are purchasing after confirming the product description. Even if you send me a message, please be gentle and give me a valid message. There is simply no reason or grounds for it, and the image quality is worse than you expected, so returning it will also be a problem. I think you will continue to have more trouble.In short, I want you to find the reason why you cannot observe satisfactorily. We would like to sell our products to our customers and other customers in a stable manner. Arrive later than DHL EXPRESS, but the price is reasonable. DHL EXPRESS can be delivered anywhere in the world in 2-7 days. A signature is required to receive the item.
And it's very fast. It takes 2 to 3 days in America. (United States of America, USA). We are offering Japan Post. The arrival period of Japan Post.
If the world is in pandemic chaos, it will take about one week to two months. Depending on the situation, it may take longer for the product to arrive. Other countries such as China, Korea, Asia, Europe, Middle East, North America South America, Africa etc. Please confirm the address before purchasing.Online Payments, Credit Cards, Debit Cards, Gift Cards, Apple Pay, Google Pay, And More. Hello, Our Company will provide courteous and responsive service. Large Selection of Goods and Additionally Listing more than Hundreds Items Every Month. Perfect Inspection by Japanese Staff with High Skills. You will need to prepare the Return label by yourself. I'm sorry to trouble you. Thank you for your understanding and cooperation. Please give me a message first. Let's solve the problem together.
We believe that there is something we can do for you from a distant country, And We will work to satisfy you so that we can resolve your complaint at any time. It is also true that there were many proble. This item is in the category "Business, Office & Industrial\Healthcare, Lab & Dental\Medical/Lab Equipment Attachments & Accessories\Microscope Parts & Accessories\Microscope Objectives". The seller is "microscope-cameralovelove" and is located in this country: JP. This item can be shipped worldwide.